Pelican Case with cut-outs for ZOLL AED Plus
Pelican Case with cut-outs for ZOLL AED Plus
Roll over image to zoom in Click on image to zoom
Pelican Case with cut-outs for ZOLL AED PlusPelican Case with cut-outs for ZOLL AED Plus

Pelican Case with cut-outs for ZOLL AED Plus

$306.00
SKU: 8000-0836-01
Size: Small
  • 100% Canadian‑Owned 100% Canadian‑Owned
  • Free Nationwide Shipping over $95 Free Nationwide Shipping over $95
  • Professionally Assembled & Compliant First Aid Kits Professionally Assembled & Compliant First Aid Kits
  • Trusted by Canadians Trusted by Canadians
  • Premium Pelican™ Defibrillator Armor: Tailored explicitly around the physical dimensions of the ZOLL AED Plus to shield it from catastrophic field impacts.
  • Custom Shock-Absorbing Foam: Features precision closed-cell internal foam cut-outs that completely isolate the medical device and its accessories from structural vibrations.
  • IP67 Rated Submersion Seal: Equipped with a continuous neoprene O-ring gasket that completely blocks out heavy downpours, fine sand, and underwater immersion.
  • Automatic Pressure Micro-Valve: Integrates a specialized Gore-Tex® ventilation valve that balances internal air pressure dynamically during rapid elevation shifts.
  • Ergonomic Field Transport: Outfitted with twin double-throw secure latches, reinforced padlock protectors, and a comfortable over-molded fold-down handle.

Upgrade your mobile disaster response vehicle, commercial shipping vessel, search and rescue aircraft, or heavy industrial jobsite with the defensive engineering of the Pelican Case with Custom Foam Cut-outs for the ZOLL AED Plus. Standard soft-sided canvas carry bags or stationary indoor wall brackets are completely vulnerable to severe weather, drop forces, fine dust penetration, and constant vehicular vibrations. This specialized heavy-duty transport vault resolves equipment vulnerability by encasing your life-saving Health Canada Class III defibrillator inside a crushproof polymer shell, ensuring your team arrives on-scene with operational medical electronics.

Proudly manufactured to meet rigorous military defense standards, the rugged exterior is molded from high-impact polypropylene resin to absorb crushing blows without fracturing. Inside, the case features custom-engineered, precision-cut high-density foam with specialized slots designed to hold the ZOLL AED Plus securely in place, alongside designated cut-outs for spare lithium power cells, adult CPR-D-padz®, and paramedic rescue prep kits. Secured by a permanent neoprene O-ring gasket and dual-action latches, this empty shell configuration allows organizations to repurpose their existing standalone ZOLL hardware into an elite, field-ready tactical rescue station

🫀 Precision Internal Component Formatting (Empty Shell Case):

  • Primary Chamber: Precision-contoured cut-out designed to grip the standalone ZOLL AED Plus defibrillator base unit without lateral movement.
  • Secondary Chamber: Tailored compartment to house one pre-connected or spare adult CPR-D-padz® or Pedi-padz® II electrode module.
  • Power Cell Chamber: Dedicated structural slot for a full backup set of 10 replacement 123A lithium photo-flash batteries.
  • Utility Chamber: Flexible accessory slot designed to contain standard tactical medical trauma shears and a first responder rescue prep pack.
  • Note: This SKU represents the rugged protective transport enclosure and custom foam kit only; the electronic defibrillator unit and medical consumables are not included.
Enclosure Manufacturer Pelican™ Products Inc. (Genuine Industrial / Military Grade Vault)
Ingress Protection Profile IP67 Certified Rating (Dust-tight and dustproof; completely submersible down to 1 meter for 30 minutes)
Structural Material Proprietary lightweight high-impact structural polypropylene copolymer resin
Internal Shock Core Precision computer-cut closed-cell high-density polyolefin foam cushion architecture
Latching Interface Dual-action double-throw structural latches providing dynamic compressive sealing leverage
Atmospheric Balancing Integrated automatic pressure equalization valve with breathable Gore-Tex® membrane filtration
Hardware Elements Corrosion-proof marine-grade stainless steel pins and reinforced padlock hasp protector eyes
Temperature Operating Range -40°C (-40°F) minimum threshold up to 99°C (210°F) maximum structural load limit

Q: Can this Pelican enclosure accommodate third-party defibrillators, or is it strictly formatted for the ZOLL AED Plus?

A: The internal high-density closed-cell foam matrix within this specific Pelican model is custom-milled using precise computerized 3D blueprints of the ZOLL AED Plus. It perfectly traces the distinct outer contours, graphical faceplate, and structural handles unique to the ZOLL unit. Attempting to fit a different medical device inside will compromise shock-absorption and prevent the case from sealing correctly. If you are upgrading a different hardware model, a case featuring a generic pick-and-pluck foam setup should be utilized instead.

Q: Why is a genuine Pelican case with an automatic pressure valve required for wilderness search-and-rescue teams or flight paramedics?

A: Airtight field cases without ventilation can become permanently vacuum-locked or structurally warped due to dramatic shifts in air density—such as when a rescue helicopter climbs over mountain passes or travels inside a pressurized cargo hold. Pelican's integrated balancing valve incorporates an advanced micro-porous Gore-Tex® membrane. This system allows air molecules to pass freely to balance internal atmospheric pressure, while remaining completely impervious to microparticulate dust or liquid water molecules, ensuring the box opens smoothly the instant a cardiac arrest emergency occurs.

You may also like

Recently viewed